Whether you are working toward maximizing product recovery or looking to get the most out of your “zero-discharge” closed-loop system, Elgin’s field proven solids control and dewatering centrifuges are a perfect choice. With over 550 centrifuges installed worldwide, Elgin’s ESS-2580HD is a field proven solution.
The ESS-2580HD features a 150 hp main drive motor, 40 hp back drive motor, Meither™ heavy-duty pillow blocks, and a 76:1 ratio gearbox. The carbon steel or stainless steel rotating assembly is 25’’ (635 mm) in diameter and 67’’ (1,701 mm) in length. With a maximum speed of 3,000 rpm, the ESS-2567HD can impart up to 3,200 G’s of force for efficient liquid / solid product separation. The rotating assembly is given further stability by the use of premium bearings installed into precision-machined pillow blocks. The rotating assembly liquid-end is fitted with six epicentric discharge ports that can be adjusted to required pond depth by simply loosing the set screws. The solids-end utilizes four, wide-mouth tungsten or ceramic-lined discharge ports and can handle large volumes of erosive solids without damaging the centrifuge. The internal conveyor can be configured as a single, double, or triple lead for increased performance. The large feed zone along with oval shaped ports ensures maximum throughput during operation.