KEMTRON 800HD2 Packaged Fluid Management System

Mud Reclaimers / Recycling Systems

 

The KEMTRON 800HD2 features two double deck Hyper G shakers, with (2) 12’’ 500 gpm desanders and a (10) 5’’  80 gpm desilters; all on top of a 5,000 gallon (18, 928 liters) tank, split between three compartments. Each compartment includes its own clean-out and includes mud guns to ensure constant agitation.  The unit includes three on-board, Series 250 40HP centrifugal pump packages and a venturi hopper.   A centralized operator’s panel includes controls for all of the KEMTRON 800HD2’s systems, including operation of the remote trash pump.

 

The pumps each perform independent functions; desilter, desander, hopper/mixing, and transfer.   Valves will be provided in the cone overflows to allow quick and easy sampling but a sampling hatch will also be provided in the clean tank for more traditional sampling techniques.

 

The KEMTRON 800HD2 carries an industry-leading 112 ft2 of screening area.   Elgin’s KEMTRON 800HD2 is provided as skid-mounted system, but can be mounted on a pintle-hook trailer with integrated generator package, upon customer request.

 

Elgin’s Hyper-G™ shaker provides power, performance and a new standard in practical design.   Capable of producing up to 7.5 G’s of force and when coupled with an optional variable frequency drive, the Hyper G™ provide power when you need it.    By adding a single point jacking system and improved screen fastening system, you now have a shaker that is as easy to operate, as it is powerful.

 

KEMTRON 800HD2 Features:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Download product brochure for additional information

  • 5,000 gallon (18,927 liters) two-compartment holding tank.

  • High -“G” Multifunctional Linear Motion Shaker with polyester powder-coated pretensioned screens.  The bottom deck of  the shaker acts as a primary scalper and  the top deck as a mud cleaner – drying  the fine particles from the desilter cones.

  • Ten (10) 5’’ hydrocyclone desilters for final stage sand and silt removal.

  • Two (2) 12’’ hydrocyclone desanders for second stage sand and silt removal.
  • Mud hopper with venturi nozzle to provide shear energy in preparing new mud.

  • Three 40 hp centrifugal pumps with mechanical seal for desilter, desander, and transfer operation / mud mixing.

  • Weatherproof NEMA 4X control panel and optional generator packages.

  • Isolation valves on desilter manifold with
    screen savers for easy cone replacement and improved screen life.

  • HMI touch screen control panel interface with high / low level tank sensors (optional).

Email: elgin.info@elginindustries.com

Phone: +1-281-261-5778

Worldwide Terms & Conditions of Sale

Copyright © 2017 All rights Reserved